SGCC Metal Series Single-Phase 4-Position Meter Box
The metal single-phase 4-position meter box is a complete low-voltage energy metering enclosure system designed for voltages of 380V, 220V, and below. It is primarily used to house core metering components such as energy meters, satisfying functional requirements for power metering, anti-tampering, and remote meter reading.
Product Description
Metal Meter Box (Hot-Dip Galvanized, Stainless Steel)
Supports wall-mounted or floor-mounted installation, requiring internal expansion bolts for secure fixation.
Outdoor installation must comply with IP34D protection rating, while indoor installation must be no less than IP20.
Product Advantages
Energy Metering
Integrating devices such as energy meters, voltage transformers, and current transformers, the system achieves precise metering of both active and reactive energy.
Anti-Tampering Design
Select models (such as prepayment meter boxes) utilize smart circuit breakers, electronic locks, and other technologies to completely eliminate the risk of external power theft.
Remote Management
Supporting features such as remote prepayment power purchasing, load monitoring, and remote disconnection for arrears, the system greatly facilitates management by utility departments.
Direct-Connected
Suitable for single-phase or three-phase energy meters, requiring no transformers.
SGCC Metal Series Single-Phase 4-Position Meter Box
HLD-BXD2.R040
HLD-BXD2.R040 Single-Phase 4-Position Metering Box
| Rated Voltage | 380 V |
| Rated Insulation Voltage | 690 V |
| Insulation Resistance | 690 V |
| Material | Stainless Steel |
| Frequency | 50 Hz |
| Protection Rating | IP34D |
| Incoming Current | 250~100 A |
| Number of Outgoing Circuits | 4 Circuits |
| Outgoing Current | 80~6 A |
| Outline Dimensions (H × W × D) mm | 800 × 748 × 180 |
Main Configuration
| Configuration | Name | Specification | Quantity |
| Main Control Configuration | Molded Case Circuit Breaker | NM1-125/3300 125 A | 1 |
| Switch Terminal | FJ6GD-100/2x25 | 3 | |
| Neutral Terminal | FJ6JJHSD-4 | 1 | |
| Meter Compartment Configuration | Connector | YD-D1 60 A | 4 |
| Post-Meter Configuration | Miniature Circuit Breaker | DZ47-63H/2P 63 A | 4 |
| Data Collector Switch | Miniature Circuit Breaker | DZ47-63/2P 6 A | 1 |
| Data Collector Compartment Configuration | Connector | YD-D1C | 1 |